Detaylı Arama

İptal
Bulunan: 14 Adet 0.001 sn
- Eklemek veya çıkarmak istediğiniz kriterleriniz için 'Dahil' / 'Hariç' seçeneğini kullanabilirsiniz. Sorgu satırları birbirine 'VE' bağlacı ile bağlıdır.
- İptal tuşuna basarak normal aramaya dönebilirsiniz.
Filtreler
Filtreler
Bulunan: 14 Adet 0.001 sn
Ambargo Durumu [1]
Tam Metin [1]
Atıf Dizini [3]
Yayın Tarihi [4]
Yayın Dili [2]
Erişime Açık

A Novel Immobilization Matrix For The Biosensing Of Phenol: Self Assembled Monolayers Of Calixarenes

TAŞÇI, Filiz | SAYIN, Serkan | AĞ SELECİ, Didem | DEMİR, Bilal | AZAK, Hacer | YILDIZ, Hüseyin Bekir | ODACI DEMİRKOL, Dilek | TİMUR, Suna

Aim: The development of calixarene based phenol biosensor. Methods: This study describes the application of a calixarene derivative, 5,17-diamino-25,27-bis(3-thiol-1-oxypropane)-26,28-dihydroxycalix[4]arene (HS-Calix-NH2) which has both amino and thiol functionalities, in the practical surface modifications for biomolecule binding. The structure of HS-Calix-NH2 allows easy inter-action with Au surface and one-step biomolecule immo-bilization. Self-assembled monolayers (SAMs) of p-amino-functionalized mercaptoalkylcalixarene (HS-Calix-NH2) were formed onto the Au electrode. Then, Laccase (Lac) ...Daha fazlası

Erişime Açık

Electrochemical Glucose Biosensors: Whole Cell Microbial and Enzymatic Determination Based on 10-(4H-Dithieno[3,2-b:2′,3′-d]Pyrrol-4-yl)Decan-1-Amine Interfaced Glassy Carbon Electrodes

ÇEVİK, Emre | CERİT, Alaaddin | TOMBULOĞLU, Hüseyin | SABİT, Hussein | YILDIZ, Hüseyin Bekir

The fabrication of amperometric biosensors based on whole cell Gluconobacter oxydans DSMZ 2343 (G. oxydans) and glucose oxidase (GOx) was performed for the detection of glucose. Glassy carbon electrodes (GCE) were coated with a 10-(4H-dithiyeno [3,2-b:2’,3’-d]pyroll-4-il)decan-1-amine (DTP-alkyl-NH2) polymer using an electropolymerization method and the formed interface was used to connect the bacteria and the enzyme to the electrode. The transfer of electrons from enzyme to electrode was successfully demonstrated by the biocatalytic activity and unique morphology of the conducting polymer. Ch ...Daha fazlası

Erişime Açık

Electrochemical polymerization of a new alkoxy-bridged dithieno (3,2-B:2’,3’-D) pyrrole derivative

KIVRAK, Arif | YILDIZ, Hüseyin Bekir | GÖKYER, Selahattin | ÇARBAŞ, Buket

A novel alkoxy-bridged dithieno (3, 2-B:2’,3’-D) pyrrole (DTP) derivative was synthesized and its corresponding polymer poly(1,2-bis(2-(4H-dithieno[3,2-b:2’,3’-d]pyrrol-4-yl)ethoxy)ethane) (P(DTP-alkoxy-DTP)) was successfully obtained electrochemically. The e ff ects of alkoxy bridge in the structure on the electrochemical and spectroelectrochemical properties of the polymer were also investigated in detail. The results showed that the polymer fi lm exhibits multielectrochromic behavior and a low band gap of 1.82 eV.

Erişime Açık

Synthesis and characterization of a new poly (dithieno (3, 2-b: 2′, 3′-d) pyrrole) derivative conjugated polymer: Its electrochromic and biosensing applications

AZAK, Hacer | YILDIZ, Hüseyin Bekir | ÇARBAŞ, Buket

Synthesis and electropolymerization of a new conjugated dithieno(3,2-b:20,30-d) pyrole (DTP) derivative, namely, 2-(2-(2-(4H-dithieno[3,2-b:20,30-d]pyrrol-4-yl)ethoxy)ethoxy)ethanamine, (DTP-alkoxy-NH2) monomer are presented. The electrochemical, spectroelectrochemical effects and biosensor capability towards to glucose oxidase enzyme of P(DTP-alkoxy-NH2) polymer fi lm are investigated in detail during the placement of alkoxy-NH2 functional unit in the polymer. Electrochemical and optical results between neutral and oxidized states of the polymer fi lm show that (P(DTP-alkoxy-NH2)) has reversibl ...Daha fazlası

Erişime Açık

Construction of ferrocene modified conducting polymer based amperometric urea biosensor

DERVISEVIC, Muammer | DERVISEVIC, Esma | ŞENEL, Mehmet | ÇEVİK, Emre | YILDIZ, Hüseyin Bekir | ÇAMURLU, Pınar

Herein, an electrochemical urea sensing bio-electrode is reported that has been constructed by fi rstly electropolymerizing 4-(2,5-Di(thiophen-2-yl)-1H-pyrrol-1-yl)aniline monomer (SNS-Aniline) on Pencil Graphite Electrode (PGE), then modifying the polymer coated electrode surface with di-amino-Ferrocene (DAFc) as the mediator, and lastly Urease enzyme through glutaraldehyde crosslinking. The e ff ect of pH, temperature, polymer thickness, and applied potential on the electrode current response was investigated besides performing storage and operational stability experiments with the interferenc ...Daha fazlası

Erişime Açık

Synthesis of Various Calix [4] arene Derivatives with Mercaptoalkyl Chains and Their Application in Removing Cr (VI) from Aqueous Solution

SAYIN, Serkan | YILDIZ, Hüseyin Bekir | EYMÜR, Serkan

Four different mercaptoalkyl-substituted calixarene derivatives (5,11,17, 23-tetra-tert-butyl-25,27-bis(3-mercaptopropoxyl)-26,28-dihydroxycalix [4]arene, 25,27-bis(3-mercaptopropoxyl)-26,28-dihydroxycalix[4]arene, 25,27-bis(5-mercaptopentanoxyl)-26,28-dihydroxycalix[4]areneand5,17di-tert-butyl-11,23-di-carboxyl-26,28-bis(3-mercaptopropoxyl)-25,27-dihydroxycalix[4]arene) were synthesized. Their structures were characterized by Fourier transform infrared spectroscopy (FTIR), 1H and 13C NMR spectroscopy, and elemental analysis techniques. Moreover, their extraction capabilities at different para ...Daha fazlası

Erişime Açık

Hydrophobic coating of surfaces by plasma polymerization in an RF plasma reactor with an outer planar electrode: synthesis, characterization and biocompatibility

KARAMAN, Mustafa | GÜRSOY, Mehmet | AYKÜL, Fatmanur | TOSUN, Zahide | DEMİREL KARS, Meltem | YILDIZ, Hüseyin Bekir

This paper presents the plasma polymerization of poly(hexa fl uorobutyl acrylate)(PHFBA) thin fi lms on different substrates in an RF plasma reactor with an outer planar electrode. This reactor con fi guration allows large area uniformity and fast processing times. Deposition rates of up to 60 nm min−1 were observed. The in fl uence of plasma power and substrate temperature on the deposition rate, structure and wettability of the as-deposited fi lms was investigated. It was observed that better hydrophobicity was obtained at high plasma power and in low temperature conditions. PHFBA thin fi lms depo ...Daha fazlası

Erişime Açık

A photoelectrochemical device for water splitting using oligoaniline-crosslinked [Ru(bpy)2(bpyCONHArNH2)]+2 dye/IrO2 nanoparticle array on TiO2 photonic crystal modified electrode

YILDIZ, Hüseyin Bekir | BEZGİN ÇARBAŞ, Buket | SÖNMEZOĞLU, Savaş | KARAMAN, Mustafa | TOPPARE, Levent

This article describes the construction of photoelectrochemical cell system splitting water into hydrogen and oxygen using UV–vis light under constant applied voltage. Oligoaniline-crosslinked 2-(4-aminobenzyl)malonic acid functionalized IrO2·nH2O nanoparticles and visible light absorbing dye, [Ru(bpy)2(bpyCONHArNH2)+2] arrays on titanium dioxide (TiO2) photonic crystals modified electrodes were used as photoanode, and nanostructures based on bonding of Pt nanoparticles by using electropolymerization on poly 4-(2,5-di(thiophene-2-il)-1H-pyrrol-1-il)benzenamine P(SNS-NH2) conducting polymer mod ...Daha fazlası

Erişime Açık

Construction of conducting polymer/cytochrome C/thylakoid membrane based photo-bioelectrochemical fuel cells generating high photocurrent via photosynthesis

ÇEVİK, Emre | ÇARBAŞ, Buket | ŞENEL, Mehmet | YILDIZ, Hüseyin Bekir

In this study, a photo-bioelectrochemical fuel cell was constructed for photocurrent generation by illuminating the electrodes within an aqueous solution. In this purpose, gold electrode was coated with poly 4-(4H-Dithieno [3,2-b:2′,3′-d]pyrol-4-yl) aniline, P(DTP-Ph-NH2) conductive polymer fi lm by using electrochemical polymerization. Then, P(DTP-Ph-NH2) conductive polymer fi lm coated surface was electrochemically modi fi ed with cytochrome C which covalently linked onto the surface via bis-aniline functionality of the polymer fi lm and formed crosslinked-structure. The thylakoid membrane was a ...Daha fazlası

Erişime Açık

Photo-electrochemical communication between cyanobacteria (Leptolyngbia sp.) and osmium redox polymer modified electrodes

KAMRUL, Hasan | YILDIZ, Hüseyin Bekir | SPERLING, Eva | CONGHAILE, Peter Ó | PACKER, Michael A | DÓNAL, Leech | HÄGERHÄLL , Cecilia | GORTON, Lo

Photosynthetic microbial fuel cells (PMFCs) are an emerging technology for renewable solar energy conversion. Major efforts have been made to explore the electrogenic activity of cyanobacteria, mostly using practically unsustainable reagents. Here we report on photocurrent generation (≈8.64 µA cm-2) from cyanobacteria immobilized on electrodes modified with an efficient electron mediator, an Os2+/3+ redox polymer. Upon addition of ferricyanide to the electrolyte, cyanobacteria generate the maximum current density of ≈48.2 µA cm-2. © the Partner Organisations 2014.

Erişime Açık

Construction of efficient bioelectrochemical devices: Improved electricity production from cyanobacteria (Leptolyngbia sp.) based on π‐conjugated conducting polymer/gold nanoparticle composite interfaces

ÇEVİK, Emre | BÜYÜKHARMAN, Mustafa | YILDIZ, Hüseyin Bekir

In this study, gold electrodes (GE) were coated with conducting polymers to obtain a high photocurrent using cyanobacteria from a novel bioelectrochemical fuel cell. For this purpose, 4‐(4H‐ditiheno[3,2‐b:2',3'‐d]pyrol‐4‐yl) aniline and 5‐(4H‐dithieno[3,2‐b:2',3'‐d]pyrol‐4‐yl) napthtalane‐1‐amine monomers were coated on GE by performing an electropolymerization process. After that, gold nanoparticles (AuNP) were specifically modified by 2‐mercaptoethane sulfonic acid and p‐aminothiophenol to attach to the electrode surface. The conducting polymers GE coat was modified with functionalized AuNP ...Daha fazlası

Erişime Açık

Construction of an Amperometric Cholesterol Biosensor Based on DTP(aryl)aniline Conducting Polymer Bound Cholesterol Oxidase

ÇEVİK, Emre | CERİT, Alaaddin | GAZEL, Nilay | YILDIZ, Hüseyin Bekir

In this study, an amperometric cholesterol biosensor was constructed based on cholesterol oxidase immobilized on a conducting 4-(4H-dithienol[3,2-b:2’,3’d]pyrrole-4)aniline polymer, (DTP(aryl)aniline). Glassy carbon electrodes were covered with P(DTP(aryl)aniline) which is used for the wiring of enzyme to the electrode surface by using electro-polymerization. The electron transfer was successfully made by the bio-catalytic activity and possession of the unique morphology of the polymer allowed efficient immobilization of the cholesterol oxidase enzyme. Analytical performances, linear range, de ...Daha fazlası

6698 sayılı Kişisel Verilerin Korunması Kanunu kapsamında yükümlülüklerimiz ve cerez politikamız hakkında bilgi sahibi olmak için alttaki bağlantıyı kullanabilirsiniz.

creativecommons
Bu site altında yer alan tüm kaynaklar Creative Commons Alıntı-GayriTicari-Türetilemez 4.0 Uluslararası Lisansı ile lisanslanmıştır.
Platforms