- Eklemek veya çıkarmak istediğiniz kriterleriniz için 'Dahil' / 'Hariç' seçeneğini kullanabilirsiniz. Sorgu satırları birbirine 'VE' bağlacı ile bağlıdır. - İptal tuşuna basarak normal aramaya dönebilirsiniz.
Dr. Öğr. Üyesi Musa DemirciKTO KARATAY ÜNİVERSİTESİ/MÜHENDİSLİK VE DOĞA BİLİMLERİ FAKÜLTESİ/MAKİNE MÜHENDİSLİĞİ BÖLÜMÜ/MAKİNE MÜHENDİSLİĞİ PR. (TAM BURSLU)/
In order to simulate the wear behavior of materials subjected to solid particle erosion due to high temperature as well as velocity effect in operating conditions such as power plants and jet engines, ASTM G76 standard is not sufficient and test rig compliant with ASTM G211-14 standard must be put forward. In this context, a test rig, alternative to existing systems where solid particle erosion wear experiments can be performed in compliance with high temperature (~ 700 °C) and particle impact velocity (~ 150 m/s) conditions, has been designed and produced. In order to ensure the widespread us ...Daha fazlası
Inconel 718 altlık malzeme üzerine iki farklı bağ kaplama (NiCrAlY ve NiCoCrAlY), Atmosferik Plazma Sprey (APS) ve Yüksek Hızlı Oksi-Yakıt Püskürtme (HVOF) yöntemleri kullanılarak uygulanmıştır. Enerji dönüşüm santralleri, gaz türbinleri, jet motor kanatları vb. uygulamalarda kullanılan bağ kaplamaların yüksek sıcaklık altında partikül etkisine maruz kalmasının simüle edilmesi amaçlanmıştır. Kaplama işlemi sonunda farklı özelliklere sahip dört numune grubu oluşturulmuştur. Bu numunelerin ortam koşulları ve sıcaklık altında katı partikül erozyon aşınma davranışları incelenmiştir. Deneylerde, yü ...Daha fazlası
The erosion wear of the thermal barrier coating (TBC) application created by the ceramic topcoat effect on the substrate material and the high-temperature resistance has been researched in the study. Solid particle erosion effect has an important role in high-temperature applications such as energy conversion plants, gas turbines, and jet engine blades. In these applications where the ambient temperature varies and high-temperature effect is important, the deformation resistance is an important criterion in TBC’s produced with atmospheric plasma spray (APS) and high-velocity oxy fuel (HVOF) me ...Daha fazlası
Carbon fiber–reinforced polymers (CFRPs) are often exposed to solid particle erosion wear due to small particles moving freely in the atmosphere or in the environment and their impact on aircraft bodies. In this study, fiber weaves of CFRP composite materials of the following types were produced: unidirectional (U), plain weave multidirectional (P), and twill 2 × 2 weave multidirectional (T). Tests that involved three different CFRP composite materials were conducted at room temperature with two groups (pure and exposed to cryogenic liquid nitrogen treatment), at two different fiber directions ...Daha fazlası
6698 sayılı Kişisel Verilerin Korunması Kanunu kapsamında yükümlülüklerimiz ve cerez politikamız hakkında bilgi sahibi olmak için alttaki bağlantıyı kullanabilirsiniz.