In the present study, the corrosion behaviour of A356 (Al-7Si-0.3Mg) alloy in 3.5% NaCl solution has been evaluated using cyclic/potentiodynamic polarization tests. The alloy was provided in the unmodified form and it was then modified with AlTi5B1 for grain refinement and with AlSr15 for Si modifications. These modifications yield to better mechanical properties. Tensile tests were performed. In addition, bifilm index and SDAS values were calculated and microstructure of the samples was investigated. As a result of the corrosion test, the Ecorr values for all conditions were determined approximately equal, and the samples were pitted rapidly. The degassing of the melt decreased the bifilm index (i.e. higher melt quality) and thereby the corrosion resistance was increased. The lowest corrosion rate was founded at degassing and as-received condition (3.9x10-3 mm/year). However, additive elements do not show the effect which degassing process shows.
Eser Adı (dc.title) | Effect of Sr and Ti Addition on the Corrosion Behavior of Al-7Si-0.3Mg Alloy |
Yayın Türü (dc.type) | Makale |
Yazar/lar (dc.contributor.author) | ÇETİN, Remzi |
Yazar/lar (dc.contributor.author) | ULUDAĞ, Muhammet |
Yazar/lar (dc.contributor.author) | KOÇABAŞ, Mustafa |
Yazar/lar (dc.contributor.author) | DIŞPINAR, Derya |
Yazar/lar (dc.contributor.author) | CANSEVER, Nurhan |
Atıf Dizini (dc.source.database) | Wos |
Atıf Dizini (dc.source.database) | Scopus |
Konu Başlıkları (dc.subject) | A356 Alloy |
Konu Başlıkları (dc.subject) | Electrochemical Corrosion |
Konu Başlıkları (dc.subject) | Modification |
Konu Başlıkları (dc.subject) | Grain Refinement |
Konu Başlıkları (dc.subject) | Bifilm İndex |
Yayıncı (dc.publisher) | Archives of Foundry Engineering |
Yayın Tarihi (dc.date.issued) | 2017 |
Kayıt Giriş Tarihi (dc.date.accessioned) | 2019-07-09T13:49:07Z |
Açık Erişim tarihi (dc.date.available) | 2019-07-09T13:49:07Z |
ISSN (dc.identifier.issn) | 1897-3310 |
Özet (dc.description.abstract) | In the present study, the corrosion behaviour of A356 (Al-7Si-0.3Mg) alloy in 3.5% NaCl solution has been evaluated using cyclic/potentiodynamic polarization tests. The alloy was provided in the unmodified form and it was then modified with AlTi5B1 for grain refinement and with AlSr15 for Si modifications. These modifications yield to better mechanical properties. Tensile tests were performed. In addition, bifilm index and SDAS values were calculated and microstructure of the samples was investigated. As a result of the corrosion test, the Ecorr values for all conditions were determined approximately equal, and the samples were pitted rapidly. The degassing of the melt decreased the bifilm index (i.e. higher melt quality) and thereby the corrosion resistance was increased. The lowest corrosion rate was founded at degassing and as-received condition (3.9x10-3 mm/year). However, additive elements do not show the effect which degassing process shows. |
Yayın Dili (dc.language.iso) | en |
Tek Biçim Adres (dc.identifier.uri) | https://hdl.handle.net/20.500.12498/923 |