Grain Refinement, Modification, Degassing and Melt Quality Relationship in Al-7Si-0.3Mg

ÇETİN, Remzi; ULUDAĞ, Muhammet; DIŞPINAR, Derya

Grain Refinement, Modification, Degassing and Melt Quality Relationship in Al-7Si-0.3Mg

Yazar/lar ÇETİN, Remzi
ULUDAĞ, Muhammet
DIŞPINAR, Derya
Yayın Türü Makale
Yayın Tarihi 2014
Tek Biçim Adres https://hdl.handle.net/20.500.12498/952
Konu Başlıkları Casting
Porosity
Casting Quality
Modification
Grain Refinement

In this work, Al-7Si-0.3Mg alloy was studied. The alloy conditions was selected to be as-received, AlB3 grain refined and Sr modified. For each parameter, castings were made before and after degassing. In order to quantify the melt quality, reduced pressure test was used and bifilm index measurements were made. All the cast parts were subjected to metallographical examination, and thus, porosity measurements, distribution, area fraction were compared for each of the casting conditions.

Koleksiyonlar Fakülteler
Mühendislik ve Doğa Bilimleri Fakültesi
Makine Mühendisliği

Erişime Açık

Görüntülenme

3

22.03.2024 tarihinden bu yana

İndirme

1

22.03.2024 tarihinden bu yana

Son Erişim Tarihi

19 Nisan 2024 14:25

Google Kontrol

Tıklayınız

Tam Metin İndirmek için tıklayın Ön izleme

Eser Adı (dc.title)	Grain Refinement, Modification, Degassing and Melt Quality Relationship in Al-7Si-0.3Mg
Yayın Türü (dc.type)	Makale
Yazar/lar (dc.contributor.author)	ÇETİN, Remzi
Yazar/lar (dc.contributor.author)	ULUDAĞ, Muhammet
Yazar/lar (dc.contributor.author)	DIŞPINAR, Derya
Atıf Dizini (dc.source.database)	Diğer
Konu Başlıkları (dc.subject)	Casting
Konu Başlıkları (dc.subject)	Porosity
Konu Başlıkları (dc.subject)	Casting Quality
Konu Başlıkları (dc.subject)	Modification
Konu Başlıkları (dc.subject)	Grain Refinement
Yayın Tarihi (dc.date.issued)	2014
Kayıt Giriş Tarihi (dc.date.accessioned)	2019-07-09T14:26:26Z
Açık Erişim tarihi (dc.date.available)	2019-07-09T14:26:26Z
ISSN (dc.identifier.issn)	1541-1548
ISSN (dc.identifier.issn)	1541-1548
Özet (dc.description.abstract)	In this work, Al-7Si-0.3Mg alloy was studied. The alloy conditions was selected to be as-received, AlB3 grain refined and Sr modified. For each parameter, castings were made before and after degassing. In order to quantify the melt quality, reduced pressure test was used and bifilm index measurements were made. All the cast parts were subjected to metallographical examination, and thus, porosity measurements, distribution, area fraction were compared for each of the casting conditions.
Yayın Dili (dc.language.iso)	en
Tek Biçim Adres (dc.identifier.uri)	https://hdl.handle.net/20.500.12498/952

Yayın Görüntülenme

Erişilen ülkeler

Erişilen şehirler

Bu site altında yer alan tüm kaynaklar Creative Commons Alıntı-GayriTicari-Türetilemez 4.0 Uluslararası Lisansı ile lisanslanmıştır.