Detaylı Arama
İptal
Bulunan: 505 Adet 0.002 sn
- Eklemek veya çıkarmak istediğiniz kriterleriniz için 'Dahil' / 'Hariç' seçeneğini kullanabilirsiniz. Sorgu satırları birbirine 'VE' bağlacı ile bağlıdır.
- İptal tuşuna basarak normal aramaya dönebilirsiniz.
Filtreler
Filtreler
Bulunan: 505 Adet 0.002 sn
Koleksiyon : Mühendislik ve Doğa ... ✕
Koleksiyon [9]
İlgili Araştırmacılar [20]
Ambargo Durumu [1]
Tam Metin [2]
Yayın Türü [5]
Yazar/lar [20]
Atıf Dizini [6]
Konu Başlıkları [20]
Yayıncı [20]
Tez Danışmanı [6]
Yayın Tarihi [10]
Tez Türü [1]
Yayın Dili [3]
dc.description.provenance [5]
Erişime Açık

Fuzzy Logic Control System with Helicopter Takeoff and Landing

ALLAHVERDİ, Novruz | HACIMURTAZAOĞLU, Murat

In this study, fuzzy expert system is designed for the provision of helicopter takeoffs and landings by fuzzy logic. For this purpose, a model helicopter and the test platform have been created that helicopter movements can be tested. The vertical motion control on the axis defined by the fuzzy logic control system is provided for the helicopter with the generated test platform with four degrees of freedom. Fuzzy logic controller was designed with Arduino 2560 control board and Visual Studio 2010 C Sharp program for controlling helicopter model and analysis of motion control was made. Real-tim ...Daha fazlası

Konferans Bildirisi 2016 6 Görüntülenme
Erişime Açık

Gabion Tipi Dayanma Duvarlarının Harmoni Arama Algoritması İle Optimizasyonu

URAY, Esra | ÇARBAŞ, Serdar | ERHAN, İbrahimHakkı | TAN, Özcan

Bu çalışmada, gabion dayanma duvarın optimum tasarımı harmoni arama algoritması kullanılarak yapılmıştır. Harmoni arama algoritması müzik icrasında en iyi harmoniyi bulma prensibine dayanan sezgisel optimizasyon yöntemidir. Gabion dayanma duvarı, standart boyutlarda üretilen gabion sepetlerle inşa edilir. Duvar tasarımında gabion sepet boyutlarının standart yerine değişken olarak alınması ile stabilite koşullarını sağlayan daha ekonomik dayanma duvarı elde etmek mümkündür. Bu çalışmanın matematik modelinde, dayanma duvar temel genişliği, sepet genişliği azaltma mesafesi ve gabion sıra sayısı t ...Daha fazlası

Konferans Bildirisi 2016 Zemin Mekaniği ve Geoteknik Mühendisliği 16. Ulusal Kongresi 7 Görüntülenme
Erişime Açık

The Function Analysis and its Application to Determination of Fuzzy Subsets for Model Helicopter Fuzzy Control

ALLAHVERDİ, Novruz | HACIMURTAZAOĞLU, Murat

In this study, an analysis of the function that determines the sub-clusters of the fuzzy controller for model helicopter control is performed. For this purpose, a model helicopter and a test platform were established in which the results of the function analysis can be seen and the application results will be examined. Arduino control card is used for model control. Analysis results are analyzed on computer using c # program. The computer connection with the model is carried out via the Usb port. Input parameters for control are obtained from the sensors on the model. The output values are cal ...Daha fazlası

Konferans Bildirisi 2017 5 Görüntülenme
Erişime Açık

Determination of Optimum Pinch Point Temperature Difference Depending on Heat Source Temperature and Organic Fluid with Genetic Algorithm

ATA, Sadık | KAHRAMAN, Ali | ŞAHİN, Remzi

In this study, the effect of evaporator pinch point temperature difference (∆TPP,e) value in Organic Rankine Cycle (ORC) on system performance was determined. Under different applications of ORC, optimum ∆TPP,e value has been determined in ORC systems designed with different heat source temperatures. By changing the ∆TPP,e value, the heat input provided to the system, the mass flow of organic fluid, the evaporation pressure and the enthalpy drop in the turbine are affected. In thermodynamic optimization, the objective function is determined as turbine power maximization. Genetic algorithm opti ...Daha fazlası

Makale 2022 Academic Platform Journal of Engineering and Smart Systems (APJESS) 7 Görüntülenme
Erişime Açık

Measurement of D-meson production versus multiplicity in p–Pb collisions at √sNN = 5.02 TeV

KARASU UYSAL, Ayben | ALICE Collaboration

Abstract: The measurement of prompt D-meson production as a function of multiplic- ity in p–Pb collisions at √sNN = 5.02TeV with the ALICE detector at the LHC is re- ported. D0, D+ and D∗+ mesons are reconstructed via their hadronic decay channels in the centre-of-mass rapidity range −0.96 < ycms < 0.04 and transverse momentum interval 1 < pT < 24 GeV/c. The multiplicity dependence of D-meson production is examined by either comparing yields in p–Pb collisions in different event classes, selected based on the multiplicity of produced particles or zero-degree energy, with those in pp collisions ...Daha fazlası

Diğer 2016 7 Görüntülenme
Erişime Açık

Water level change of lakes and sinkholes in Central Turkey under anthropogenic effects

DEMİR, Vahdettin | ÜLKE KESKİN, Aslı

Determining water level changes in lakes is significant for sustainable water supply planning, flood control, water resource management, and economic development with ecosystem sustainability. Trend analysis is a commonly used tool for detecting changes in hydrologic time series of quantities such as lake level, precipitation and temperature. Trend analysis of meteorological variables is very important for assessing the long-term changes in lake levels. This study examines long-term changes in the lakes in the Central Anatolia region of Turkey. Kızören and Timraş sinkhole lakes and Lakes Tuz a ...Daha fazlası

Makale 2020 Theoretical and Applied Climatology 3 Görüntülenme
Erişime Açık

Bifilms And Hot Tearing Of Al-Si Alloys

ÇETİN, Remzi | ULUDAĞ, Muhammet | DIŞPINAR, Derya

Hot tearing is one of the most interesting defects that can be found during casting of aluminium alloys. The definition of this defects has some uncertainties such as “it does not always appear under apparently identical conditions” or “the defect is highly specific to certain alloys”. There are several works in the literature on the modelling and analytical approaches. However, the experimental findings have not been satisfactory. In this work, A356, A380 and A413 alloys were cast in two different moulds to investigate the hot tearing tendency with regard to the melt quality. It was found tha ...Daha fazlası

Konferans Bildirisi 2016 Shape Cutlng: 6th lntenudlmud Symposiam, Springer Link 6 Görüntülenme
Erişime Açık

Electrochemical polymerization of a new alkoxy-bridged dithieno (3,2-B:2’,3’-D) pyrrole derivative

KIVRAK, Arif | YILDIZ, Hüseyin Bekir | GÖKYER, Selahattin | ÇARBAŞ, Buket

A novel alkoxy-bridged dithieno (3, 2-B:2’,3’-D) pyrrole (DTP) derivative was synthesized and its corresponding polymer poly(1,2-bis(2-(4H-dithieno[3,2-b:2’,3’-d]pyrrol-4-yl)ethoxy)ethane) (P(DTP-alkoxy-DTP)) was successfully obtained electrochemically. The e ff ects of alkoxy bridge in the structure on the electrochemical and spectroelectrochemical properties of the polymer were also investigated in detail. The results showed that the polymer fi lm exhibits multielectrochromic behavior and a low band gap of 1.82 eV.

Makale 2018 Turkish Journal of Chemistry (TUBITAK) 3 Görüntülenme
Erişime Açık

Direct photon production in Pb-Pb collisions at sNN−−−√ = 2.76 TeV

KARASU UYSAL, Ayben | ALICE Collaboration

Direct photon production at mid-rapidity in Pb-Pb collisions at sNN−−−√=2.76 TeV was studied in the transverse momentum range 0.9

Makale 2016 8 Görüntülenme
Erişime Açık

Direct photon elliptic flow in Pb–Pb collisions at √sNN = 2.76 TeV

KARASU UYSAL, Ayben | ALICE Collaboration

The elliptic flow of inclusive and direct photons was measured at mid-rapidity in two centrality classes 0–20% and 20–40% in Pb–Pb collisions at √sNN = 2.76 TeV by ALICE. Photons were detected with the highly segmented electromagnetic calorimeter PHOS and via conversions in the detector material with the e+e− pairs reconstructed in the central tracking system. The results of the two methods were combined and the direct-photon elliptic flow was extracted in the transverse momentum range 0.9 < pT < 6.2 GeV/c. A comparison to RHIC data shows a similar magnitude of the measured direct- photon elli ...Daha fazlası

Makale 2019 5 Görüntülenme
Erişime Açık

Farklı Dolgu Duvarların Betonarme Bir Yapının Sismik Yük Davranışına Etkisinin İncelenmesi

SOYDOĞAN, Hasan Furkan | SANCIOĞLU, Sadrettin | CAN, Hüsnü

Dolgu duvarlar, betonarme çerçevelerin arasına mimari projeye uygun olarak yerleştirilen elemanlardır. Taşıyıcı özelliği olmadığından, yapılarda zati ağırlık olarak kesit hesaplarında dikkat edilse de yatay yüklere karşı etkisi ihmal edilmektedir. Bu çalışmada, x- yönünde 7, y- yönünde 3 açıklığa sahip 10 katlı betonarme bir yapıda dolgu malzemesi olarak kullanılan boşluklu fabrika tuğlasının ve gazbeton bloğun, yapının sismik yük davranışına etkisi irdelenmiştir. Çalışmada, 9 farklı dolgu duvar düzeni modellenmiştir. Yapıdaki kolon ve kirişlerin kesitleri yürürlükte olan Betonarme Yapıların T ...Daha fazlası

Konferans Bildirisi 2021 1st International Conference on Applied Engineering and Natural Sciences 4 Görüntülenme
Erişime Açık

Synthesis and characterization of a new poly (dithieno (3, 2-b: 2′, 3′-d) pyrrole) derivative conjugated polymer: Its electrochromic and biosensing applications

AZAK, Hacer | YILDIZ, Hüseyin Bekir | ÇARBAŞ, Buket

Synthesis and electropolymerization of a new conjugated dithieno(3,2-b:20,30-d) pyrole (DTP) derivative, namely, 2-(2-(2-(4H-dithieno[3,2-b:20,30-d]pyrrol-4-yl)ethoxy)ethoxy)ethanamine, (DTP-alkoxy-NH2) monomer are presented. The electrochemical, spectroelectrochemical effects and biosensor capability towards to glucose oxidase enzyme of P(DTP-alkoxy-NH2) polymer fi lm are investigated in detail during the placement of alkoxy-NH2 functional unit in the polymer. Electrochemical and optical results between neutral and oxidized states of the polymer fi lm show that (P(DTP-alkoxy-NH2)) has reversibl ...Daha fazlası

Makale 2018 Polymer (Elsevier) 5 Görüntülenme
6698 sayılı Kişisel Verilerin Korunması Kanunu kapsamında yükümlülüklerimiz ve cerez politikamız hakkında bilgi sahibi olmak için alttaki bağlantıyı kullanabilirsiniz.
Tamam Açık Erişim PolitikasıAçık Erişim Yönergesi
creativecommons
Bu site altında yer alan tüm kaynaklar Creative Commons Alıntı-GayriTicari-Türetilemez 4.0 Uluslararası Lisansı ile lisanslanmıştır.
Platforms