Detaylı Arama
İptal
Bulunan: 65 Adet 0.002 sn
- Eklemek veya çıkarmak istediğiniz kriterleriniz için 'Dahil' / 'Hariç' seçeneğini kullanabilirsiniz. Sorgu satırları birbirine 'VE' bağlacı ile bağlıdır.
- İptal tuşuna basarak normal aramaya dönebilirsiniz.
Filtreler
Filtreler
Bulunan: 65 Adet 0.002 sn
Yayın Tarihi : 2016 ✕Koleksiyon : Mühendislik ve Doğa ... ✕
Koleksiyon [8]
İlgili Araştırmacılar [20]
Ambargo Durumu [1]
Tam Metin [1]
Yayın Türü [3]
Yazar/lar [19]
Atıf Dizini [4]
Konu Başlıkları [20]
Yayıncı [18]
Tez Danışmanı [2]
Yayın Tarihi [1]
Yayın Dili [3]
dc.description.provenance [5]
Erişime Açık

Çimento İle Stabilizasyonda Optimum Çimento Oranının Belirlenmesi

URAY, Esra | SANCIOĞLU, Sadrettin | ÇUBUKÇU, Esra Aslı | ERDEM, Mehmet Doğukan

Bu çalışmada, farklı çimento ve su oranlarının çimento stabilize zemin dayanımına etkisi deneysel olarak araştırılmıştır. Zayıf zeminin iyileştirilmesi ve belirli zemin özelliklerini sağlaması karayolu uygulamalarında önemli bir konudur. Yol yapımında kullanılan çimento bağlayıcılı granüler temel tabakası çakıl ve ya kırmataş dolgu malzemesi kullanılarak elde edilmektedir. Yol maliyeti ve hizmet ömrü açısından yol altı temel tabakası gerekli dayanımı sağlamalı ve oturmalara karşı dayanıklı olmalıdır. Çimento stabilizasyonunda, taneler arası boşluklar doldurulur ve zeminin mukavemeti arttırılır ...Daha fazlası

Konferans Bildirisi 2016 1. Ulusal Genç Geoteknik Mühendisleri Sempozyumu 3 Görüntülenme
Erişime Açık

Elliptic flow of electrons from heavy-flavour hadron decays at mid-rapidity in Pb–Pb collisions at √sNN = 2.76 TeV

KARASU UYSAL, Ayben | ALICE Collaboration

The elliptic flow of electrons from heavy-flavour hadron decays at mid-rapidity (|y| < 0.7) is measured in Pb–Pb collisions at √sNN = 2.76 TeV with ALICE at the LHC. The particle azimuthal distribution with respect to the reaction plane can be parametrized with a Fourier expansion, where the second coefficient (v2) represents the elliptic flow. The v2 coefficient of inclusive electrons is measured in three centrality classes (0–10%, 10–20% and 20–40%) with the event plane and the scalar product methods in the transverse momentum (pT) intervals 0.5–13GeV/c and 0.5–8GeV/c, respectively. After su ...Daha fazlası

Diğer 2016 3 Görüntülenme
Erişime Açık

Fuzzy Logic Control System with Helicopter Takeoff and Landing

ALLAHVERDİ, Novruz | HACIMURTAZAOĞLU, Murat

In this study, fuzzy expert system is designed for the provision of helicopter takeoffs and landings by fuzzy logic. For this purpose, a model helicopter and the test platform have been created that helicopter movements can be tested. The vertical motion control on the axis defined by the fuzzy logic control system is provided for the helicopter with the generated test platform with four degrees of freedom. Fuzzy logic controller was designed with Arduino 2560 control board and Visual Studio 2010 C Sharp program for controlling helicopter model and analysis of motion control was made. Real-tim ...Daha fazlası

Konferans Bildirisi 2016 6 Görüntülenme
Erişime Açık

Gabion Tipi Dayanma Duvarlarının Harmoni Arama Algoritması İle Optimizasyonu

URAY, Esra | ÇARBAŞ, Serdar | ERHAN, İbrahimHakkı | TAN, Özcan

Bu çalışmada, gabion dayanma duvarın optimum tasarımı harmoni arama algoritması kullanılarak yapılmıştır. Harmoni arama algoritması müzik icrasında en iyi harmoniyi bulma prensibine dayanan sezgisel optimizasyon yöntemidir. Gabion dayanma duvarı, standart boyutlarda üretilen gabion sepetlerle inşa edilir. Duvar tasarımında gabion sepet boyutlarının standart yerine değişken olarak alınması ile stabilite koşullarını sağlayan daha ekonomik dayanma duvarı elde etmek mümkündür. Bu çalışmanın matematik modelinde, dayanma duvar temel genişliği, sepet genişliği azaltma mesafesi ve gabion sıra sayısı t ...Daha fazlası

Konferans Bildirisi 2016 Zemin Mekaniği ve Geoteknik Mühendisliği 16. Ulusal Kongresi 7 Görüntülenme
Erişime Açık

Measurement of D-meson production versus multiplicity in p–Pb collisions at √sNN = 5.02 TeV

KARASU UYSAL, Ayben | ALICE Collaboration

Abstract: The measurement of prompt D-meson production as a function of multiplic- ity in p–Pb collisions at √sNN = 5.02TeV with the ALICE detector at the LHC is re- ported. D0, D+ and D∗+ mesons are reconstructed via their hadronic decay channels in the centre-of-mass rapidity range −0.96 < ycms < 0.04 and transverse momentum interval 1 < pT < 24 GeV/c. The multiplicity dependence of D-meson production is examined by either comparing yields in p–Pb collisions in different event classes, selected based on the multiplicity of produced particles or zero-degree energy, with those in pp collisions ...Daha fazlası

Diğer 2016 7 Görüntülenme
Erişime Açık

Bifilms And Hot Tearing Of Al-Si Alloys

ÇETİN, Remzi | ULUDAĞ, Muhammet | DIŞPINAR, Derya

Hot tearing is one of the most interesting defects that can be found during casting of aluminium alloys. The definition of this defects has some uncertainties such as “it does not always appear under apparently identical conditions” or “the defect is highly specific to certain alloys”. There are several works in the literature on the modelling and analytical approaches. However, the experimental findings have not been satisfactory. In this work, A356, A380 and A413 alloys were cast in two different moulds to investigate the hot tearing tendency with regard to the melt quality. It was found tha ...Daha fazlası

Konferans Bildirisi 2016 Shape Cutlng: 6th lntenudlmud Symposiam, Springer Link 6 Görüntülenme
Erişime Açık

Event-shape engineering for inclusive spectra and elliptic flow in Pb-Pb collisions at √sNN = 2.76 TeV

KARASU UYSAL, Ayben | ALICE Collaboration

We report on results obtained with the event-shape engineering technique applied to Pb-Pb collisions at sNN = 2.76 TeV. By selecting events in the same centrality interval, but with very different average flow, different initial-state conditions can be studied. We find the effect of the event-shape selection on the elliptic flow coefficient v2 to be almost independent of transverse momentum pT, which is as expected if this effect is attributable to fluctuations in the initial geometry of the system. Charged-hadron, -pion, -kaon, and -proton transverse momentum distributions are found to be har ...Daha fazlası

Diğer 2016 4 Görüntülenme
Erişime Açık

Higher harmonic flow coefficients of identified hadrons in Pb-Pb collisions at √sNN = 2.76 TeV

KARASU UYSAL, Ayben | ALICE Collaboration

The elliptic, triangular, quadrangular and pentagonal anisotropic flow coeffi- cients for π±, K± and p+p in Pb-Pb collisions at √sNN = 2.76 TeV were measured with the ALICE detector at the Large Hadron Collider. The results were obtained with the Scalar Product method, correlating the identified hadrons with reference particles from a different pseudorapidity region. Effects not related to the common event symmetry planes (non-flow) were estimated using correlations in pp collisions and were subtracted from the measure- ment. The obtained flow coefficients exhibit a clear mass ordering for tra ...Daha fazlası

Makale 2016 4 Görüntülenme
Erişime Açık

Measurement of D+s production and nuclear modification factor in Pb-Pb collisions at √sNN =2.76TeV

KARASU UYSAL, Ayben | ALICE Collaboration

Abstract: The production of prompt D+s mesons was measured for the first time in collisions of heavy nuclei with the ALICE detector at the LHC. The analysis was performed on a data sample of Pb-Pb collisions at a centre-of-mass energy per nucleon pair, √sNN, of 2.76 TeV in two different centrality classes, namely 0–10% and 20–50%. D+s mesons and their antiparticles were reconstructed at mid-rapidity from their hadronic decay channel D+s → φπ+, with φ → K−K+, in the transverse momentum intervals 4 < pT < 12 GeV/c and 6 < pT < 12GeV/c for the 0–10% and 20–50% centrality classes, respectively. Th ...Daha fazlası

Makale 2016 3 Görüntülenme
Erişime Açık

3ΛH and 3Λ¯ production in Pb–Pb collisions at √sNN = 2.76 TeV

KARASU UYSAL, Ayben | ALICE Collaboration

The production of the hypertriton nuclei 3ΛH and 3Λ¯ has been measured for the first time in Pb–Pb collisions at √sNN = 2.76 TeV with the ALICE experiment at LHC. The pT-integrated 3 !H yield in one unity of rapidity, dN/dy × B.R. ! 3 !H→3He,π−" = (3.86 ± 0.77(stat.) ± 0.68(syst.)) × 10−5 in the 0–10% most central collisions, is consistent with the predictions from a statistical thermal model using the same temperature as for the light hadrons. The coalescence parameter B3 shows a dependence on the transverse momentum, similar to the B2 of deuterons and the B3 of 3He nuclei. The ratio of yield ...Daha fazlası

Makale 2016 8 Görüntülenme
Erişime Açık

Measurement of an Excess in the Yield of J/ψ at Very Low pT in Pb–Pb Collisions at sNN = 2.76 TeV

KARASU UYSAL, Ayben | ALICE Collaboration

We report on the first measurement of an excess in the yield of J=ψ at very low transverse momentum (pT < 0.3 GeV=c) in peripheral hadronic Pb-Pb collisions at sNN 1⁄4 2.76 TeV, performed by ALICE at the CERN LHC. Remarkably, the measured nuclear modification factor of J=ψ in the rapidity range 2.5 < y < 4 reaches about 7 (2) in the pT range 0–0.3 GeV=c in the 70%–90% (50%–70%) centrality class. The J=ψ production cross section associated with the observed excess is obtained under the hypothesis that coherent photoproduction of J=ψ is the underlying physics mechanism. If confirmed, the observa ...Daha fazlası

Makale 2016 7 Görüntülenme
Erişime Açık

Jet-like correlations with neutral pion triggers in pp and central Pb–Pb collisions at 2.76 TeV

KARASU UYSAL, Ayben | ALICE Collaboration

We present measurements of two-particle correlations with neutral pion trigger particles of transverse momenta

Diğer 2016 6 Görüntülenme
6698 sayılı Kişisel Verilerin Korunması Kanunu kapsamında yükümlülüklerimiz ve cerez politikamız hakkında bilgi sahibi olmak için alttaki bağlantıyı kullanabilirsiniz.
Tamam Açık Erişim PolitikasıAçık Erişim Yönergesi
creativecommons
Bu site altında yer alan tüm kaynaklar Creative Commons Alıntı-GayriTicari-Türetilemez 4.0 Uluslararası Lisansı ile lisanslanmıştır.
Platforms